Redundant WAN ports
Can VYATTA provide a solution for redundant WAN ports?As an example : two wan ports with ipsec for active /standby or active/active to trigger failover from one wan1 to another wan2If it can, please...
View ArticleRatelimit setup at v5600
Hello, I am using v5600 with verson 4.1R3. Following is the part of config with interface ----------------------------------------------------------dataplane dp0p3s0f1 { vif 10 {...
View ArticleBrocade_5600_vRouter_3.5R6S3_4CPU-16GB-8IF and zones.
Is this version really old or something?It seems to be missing stuff like local-zone, so I can't actually use zones AT ALL. (Or I'm doing it really wrong.) All I want to be able to achieve: remote...
View ArticleClustering Vyatta multi datacenter
Hello. I would like to configure clustering or high availability on 2 Vyatta. Behind my Vyatta, there is a VM. Its vyatta are in two different datacenter and have one public IP and one private IP....
View ArticleIn Vyatta router: Yang models used to expand capabilities/ capabilities...
Hi, I recently came across this approach (but am not clear) where Brocade Vyatta router uses Yang models for the router to extend or expand capabilites. The capabilities are packed as augments......
View ArticleMain table does not exist
Iam trying to test the evaluation version of vyatta 5600. To me strangely the routing table doesnt get activated on the Live-Cd running on top of KVM. Is this a limitation from the Live CD. The same CD...
View ArticleHow can I add a new service/ yang model in the Vyatta router?
Hi, I am trying to add a new service in the Vyatta router. (VR35R6) I created a yang model in the vyatta-service-newfile.yang similar to the telnet service and at the same hirearchy as the...
View Article6.7R10 cipher list for https
I'm trying to modify the lighttpd cipher list. I need to remove the DES-CBC-SHA ciphers. After many hours of trying I find that any cipher list that allows the service to start effectively gives the...
View ArticleVyatta 6.7 r10
SoftLayer made Vyatta 6.7 R10 available last week .... but I don't see any release notes.As a matter of fact, it is difficult to find release notes for any Vyatta version ... or perhaps I am missing...
View ArticleClik here to view.
MS Azure & vRouter
Hi Guys I need some advice please. We ran a RRAS server using the NVGRE functionality on MS Azure to create dynamic routing between internal cloud subnets and public facing ip addresses. The solution...
View Articlevyos ssh hangs at prompt after login
After successully logging in through ssh the prompt simply stops responding. Using the -v option shows successful log in but it won't accept any input after that.
View ArticleConfigure nat64 on vRouter 5415 6.7 R10
HeyDoes anyone have any reference on how to configure NAT64 on a vRouter 5415 6.7 R10?The only instructions I can find are for the 5600.Thanks!
View ArticleSNMP timeout no response
Hi I have configured multiple vyatta routers, and i can't get SNMP working on any of them. When i run show snmp i get: Timeout: No response from 127.0.0.1 I have the following configured: set service...
View ArticleBrocade vRouter 5415 & password policy
Hello, Is it possible to implement any password policy (like min/max password length) on virtual routers 5415 ? I see /etc/login.defs configuration file on it (comes with Debian), but no corresponding...
View ArticleSend All Traffic Through IPSEC (vti) VPN
Let me preface this by saying that the hardware that I'm using is an Ubiquiti EdgeRouter Lite running the newest 1.9.0 software. As you may know this OS is based off a Vyatta fork. I'm not making...
View Articleinitial Main Mode message received on x.x.x.x:4500 but no connection has been...
I have been experiencing an issue where every 2 or so weeks a VPN connection from one vyatta vrouter (mine) to another vyatta vrouter (owned and operated by a 3rd party) will drop. When it drops, I try...
View ArticleEnable IPSEC on 5600
Hi Guys I need assistance with this please. I need remote access using l2tp to a 5600. On a 5400 router, I find it to be very easy to enable ipsec on an interface by simply typing in this command: set...
View ArticleNewbie Vyatta Firewall Rule Port question
Hi all. I'm new to Vyatta but have used software firewalls in the past. I'm trying to simply allow 50 Ports and block all the other ports. I can't find an example of how this a)is done (step by...
View ArticleI have the Brocade Virtual Appliance 11.0 on AWS but autoscaling is not...
I have the Brocade Virtual Appliance 11.0 on AWS but autoscaling is not available due to licensing. How do I enable it, where can I get a license and what is the cost. Do I need to start up a...
View Article